Direct online retailing of flat bricks and corner flat bricks

SMOKED BRICKS

New generation of the architectural exterior cladding.
Clay facing bricks with coloured body and shades of grey.

Architecture has reported the need for the use of bricks with modern character and emotionality. The response by S.Anselmo is the range of Smoked Bricks. We are proud about our capability to propose these new generation bricks that match perfectly the actual trend of the design towards a contemporary architectural expression which makes extensive use of materials such as glass and steel. Our range of Smoked Bricks fits completely with suggestions generated through the use of these materials and in particular contributes to define the modernity of the interior spaces keeping the exclusivity of the intimate atmosphere. The range is expressed in many colour tones and degrees of shades in all the sizes of our brick's production. Per each sizes of our bricks, there are the availability of thin bricks and corners that can be supplied also packaged for the DIY chain.

SMOKED BRICKS with WHITE JOINT MORTAR

The choice for the use of smoked bricks must be accompaniedby selecting the right colour of the joint-mortar. We present in thefollowing pictures the combination of the different types of SmokedBricks with the use of the white joint-mortar. The light colour of the jointhelps to highlight the clay brick, improving the design of the elevations.This light colour mortar is particularly recommended in small volumebuildings sizes and in cases where it is needed to emphasizes the effectof the brick wall decoration.

We reccomend the use of the S.Anselmo
extra white joint mortar: code MGBW.

SMOKED BRICKS with GREY JOINT MORTAR

The choice for the use of smoked bricks must be accompanied by selecting the right colour of the joint-mortar. We present in the following pictures the combination of the different types of Smoked Bricks with the use of the grey joint-mortar. The grey colour of the joint contributes to decrease the decorative effect of the brick, improving the impact of the whole wall. This dark color mortar is particularly recommended in large buildings sizes and in cases where it is needed to reduce the effect of the brick wall decoration.

We reccomend the use of the S.Anselmo
grey joint mortar: code MGGG.

SMOKED BRICKS with Extra White joint mortar

LOFB with MGBW

SMOKED BRICKS with Extra White joint mortar

LOFB + VTB with MGBW

SMOKED BRICKS with gray joint mortar

LOFB with MGGG

SMOKED BRICKS with gray joint mortar

LOFB + VTB with MGGG

SMOKED BRICKS with Extra White joint mortar

LOFB + VTB + MHB with MGBW

SMOKED BRICKS with Extra White joint mortar

MHB with MGBW

SMOKED BRICKS with gray joint mortar

LOFB + VTB + MHB with MGGG

SMOKED BRICKS with gray joint mortar

MHB with MGGG

SMOKED BRICKS with Extra White joint mortar

MIB with MGBW

SMOKED BRICKS with Extra White joint mortar

MIB + VTB with MGBW

SMOKED BRICKS with gray joint mortar

MIB with MGGG

SMOKED BRICKS with gray joint mortar

MIB + VTB with MGGG

SMOKED BRICKS with Extra White joint mortar

MIB + VTB + MHB with MGBW

SMOKED BRICKS with Extra White joint mortar

VTB with MGBW

SMOKED BRICKS with gray joint mortar

MIB + VTB + MHB with MGGG

SMOKED BRICKS with gray joint mortar

VTB with MGGG

SMOKED BRICKS / SOME PROJECTS

Photo gallery : SMOKED BRICKS
Photo gallery : SMOKED BRICKS
Photo gallery : SMOKED BRICKS
Photo gallery : SMOKED BRICKS
Photo gallery : SMOKED BRICKS
Photo gallery : SMOKED BRICKS
Photo gallery : SMOKED BRICKS
Photo gallery : SMOKED BRICKS

Types of available products

SMOKED BRICKS, available products

ISOVISTA SMOKED BRIKS SYSTEM

The "Smoked Briks" range is also available for the ISOVISTA system, with panels of different thickness based on the final thermal & acoustic parameter required into the specific project. So it is available the supply of a panel with thin "Smoked Briks" veneer.

SMOKED BRICKS - ISOVISTA

SMOKED BRICKS - ISOVISTA

 

pdf
Download the brochure S.Anselmo SMOKED BRICKS
S.Anselmo, living the difference
Fornace S.Anselmo S.p.A.
via Tolomei, 61
35010 Loreggia (PD)
P.IVA: IT02365150289
R.I.I.: Padova
Capitale sociale: 904.000,00 €
Tel.: +39 049 9304711
Fax: +39 049 8251217
e-mail: com@santanselmo.it